170,000 troops on the front lines, don't forget

Buy Ford Parts & Accessories

Baseball Express
Healthy Snacks with NutsOnline!
Custom Search

Reference Section: Colorado Midland RR, Central Colorado

The Colorado Midland Railway, incorporated in 1883, was the first standard gauge railroad built over the Continental Divide in Colorado. It ran from Colorado Springs to Leadville and through the divide at Hagerman Pass to Aspen and Grand Junction. Later the line was extended 11 miles west of Glenwood Springs to New Castle. The ATSF operated the railroad as a subsidiary from September 1890 on. The Hagerman Tunnel was completed through the divide in 1887, and in 1891 it was replaced by the Busk-Ivanhoe Tunnel which was at a lower altitude; this shortened the line and also made the grade easier.

A new company known as the Colorado Midland Railway took over operation of the railroad after the company was sold through bankruptcy court on May 4, 1897. The Midland came under control of the Colorado & Southern Railway and the Denver and Rio Grande Railroad in 1900, but again declared bankruptcy April 21, 1917, and was sold at auction to Albert E. Carlton of Colorado Springs. The Midland struggled to remain solvent, but America's entry into World War I overwhelmed the Midland's capacity to handle the sudden upswing in freight traffic; the USRA approved Carlton's petition to abandon the line in 1918 and the entire line was scrapped in the 1920s.

The Midland never made a profit; not only did the rugged topography it crossed result in astronomical construction & operating costs, but both east & west terminuses prevented effective through-traffic. It has been theorized that had the Midland achieved its original goals of connecting Salt Lake City with Denver and other points east, through-traffic connections with the Union Pacific & ATSF may have helped the Midland eventually become profitable. But, it was not to be, and one of the finest, well-built railroads in the country was abandoned.

My wife & I traveled over part of the old Colorado Midland grade in July 2006 from Leadville to Busk, on the east side of the Continental Divide, and reconnected with it on the western slope of the Divide. Alas, we did not have a chance to pay a visit to the western portal of either the Carlton/Busk-Ivanhoe tunnel nor the Hagerman tunnel, so we will have to save that for another trip.

Old Colorado Midland RR grade on western slope of Continental Divide, west of Turquoise Lake. The CMRR spared no expense to carve a route through this rugged terrain,and it is still easily passable today; as you can see, we had an all-wheel-drive crossover vehicle, and we had no problems.
 
< ---- PREVIOUS
Easy
Image
Navigation

NEXT ----- >
 

Back to Colorado Midland Photos Page | Back to Trains Reference Page

Silver State Specialties was created in 1999 to offer quality resin accessories, replacement parts and conversion kits, suitable for many 1/25-scale plastic model kits.  SSS specializes in accessories and parts for plastic model pickup, SUV, 4x4, and heavy truck & trailer kits.  1/32-scale and 1/35-scale parts and accessories will be available in the future for model truck kits, such as the 1/32 Monogram Snap-Tite and ERTL snap-together kits, as well as 1/35-scale Revell, Italeri, AFV Club, Trumpeter, Airfix, Heller, Tamiya, and other military model truck kits.  Some of these smaller scale model kits are quite well detailed, and a wide variety of photo-etched, resin, and other accessories are widely available for most of these military truck model kits. What's even more exciting is the line of 1/24th & 1/25th-scale military model kits and conversions we are in the early stages of developing, to nicely compliment your ERTL, AMT, Italeri, Revell, and other brands of truck models.

Silver State Specialties is working on resin accessories and complete kits for G- gauge outdoor garden railway trains ("Large Scale") in 1/24th-scale. Some patterns have been completed, and many more are under construction. These kits and accessories will include complete Beyer-Garratt style of locomotives and Narrow Gauge ore hopper cars, as well as 24-inch & 30-inch gauge industrial equipment in this same scale.

SSS also has master patterns partially completed for many 1/16-scale model truck accessories and conversion kits, mainly for the Monogram-Revell 1/16-scale model truck kits.  Some projected accessories for these 1/16-scale kits are front drive axles, different wheels and tires, air cleaner accessories, pusher and tag axles, oil filters and engine accessories, and possibly different engines.  Cab & hood conversion kits remain a possibility for these monsters as well, but are still years away from being offered as there are more pressing projects to push forward with first.  But someday they should be available!

Thank you for your continued support!

Free shipping on truck accessories at AutoAnything

Rockymountainatvmc.com - Dirt bike & ATV parts

IceJerseys.com
 
Please direct all questions regarding this site to