Custom Search

REFERENCE SECTION: HEAVY HAUL


Closeup Views of Heavy-Haul Lowboy Goosenecks (Las Vegas, Nevada; 1996)


Here are some closeup views of a detachable-gooseneck lowboy trailer. The gooseneck (the part attached to the truck) detaches from the lowboy trailer so equipment can be easily loaded/unloaded. The raising & lowering of the gooseneck, as well as locking/unlocking of pins, is typically done with hydraulics. Hydraulic controls are usually mounted on the lowboy unit, along with a generator (or pony motor) to power the hydraulic pump, unless the tractor is equipped with a hydraulic pump and attachments.
Here is a different heavy-haul lowboy unit, manufactured by Cozad.<br>
				  Each manufacturer uses a different method of attachment and are very unique from each other.<br>
				  The hoses in the center of the photo are hydraulic hoses for attachment and detachment of the gooseneck from the lowboy bed
Closeup View of Heavy-Haul Lowboy Gooseneck
Here is a different heavy-haul lowboy unit, manufactured by Cozad.<br>
				  Each manufacturer uses a different method of attachment and are very unique from each other.<br>
				  The hoses in the center of the photo are hydraulic hoses for attachment and detachment of the gooseneck from the lowboy bed
Closeup View of Heavy-Haul Lowboy Gooseneck
This is the jeep dolly, which is between the lowboy bed unit and the truck tractor.<br>
				  Check out the battery and hydraulic fluid tank in the center of the photo, for use by the generator and hydraulic pump<br>
				  for attachment/detachment of goosenecks from the lowboy bed unit
Closeup View of Heavy-Haul Lowboy
Opposite side view of the jeep dolly, showing the generator & hydraulic pump, <br>for attachment and detachment of goosenecks from the lowboy bed unit
Closeup View of Heavy-Haul Lowboy

Closer view inside the jeep dolly, showing the generator and hydraulic pump,<br>
				  for attachment and detachment of goosenecks from the lowboy bed unit, as well as the hydraulic fluid tank
Closeup View of Heavy-Haul Lowboy
Closer view inside the jeep dolly, showing a hydraulic fitting and hoses.<br>
				  The generator is the red item at the left of the photo
Closeup View of Heavy-Haul Lowboy
View from the rear of the heavy-haul lowboy unit. The very rear unit in foreground of photo<br>
				  is called a stinger, and pivots separately from the lowboy bed unit to assist in turning.  The stinger can also be<br>
				  removed if a load does not require its use
Closeup View of Heavy-Haul Lowboy
View from the rear of the heavy-haul lowboy unit.  The very rear unit on right side of photo<br>
				  is called a stinger, and pivots separately from the lowboy bed unit to assist in turning.  Here you can get a better idea<br>
				  of how the stinger attaches to the lowboy bed unit
Closeup View of Heavy-Haul Lowboy

Side view of the stinger unit
Closeup View of Heavy-Haul Lowboy
Looking down to the brake cylinder and beam axle of the stinger unit
Closeup View of Heavy-Haul Lowboy
Looking down on the rear of the lowboy bed unit, and how the stinger attaches
Closeup View of Heavy-Haul Lowboy
Looking down on the rear of the lowboy bed unit
Closeup View of Heavy-Haul Lowboy

Looking down on the rear of the lowboy bed unit and the stinger unit
Closeup View of Heavy-Haul Lowboy
     

 

Back to Heavy Haulage Page | Back to Trucks Reference Page

Silver State Specialties was created in 1999 to offer quality resin accessories, replacement parts and conversion kits, suitable for many 1/25-scale plastic model kits.  SSS specializes in accessories and parts for plastic model pickup, SUV, 4x4, and heavy truck & trailer kits.  1/32-scale and 1/35-scale parts and accessories will be available in the future for model truck kits, such as the 1/32 Monogram Snap-Tite and ERTL snap-together kits, as well as 1/35-scale Revell, Italeri, AFV Club, Trumpeter, Airfix, Heller, Tamiya, and other military model truck kits.  Some of these smaller scale model kits are quite well detailed, and a wide variety of photo-etched, resin, and other accessories are widely available for most of these military truck model kits. What's even more exciting is the line of 1/24th & 1/25th-scale military model kits and conversions we are in the early stages of developing, to nicely compliment your ERTL, AMT, Italeri, Revell, and other brands of truck models.

Silver State Specialties is working on resin accessories and complete kits for G- gauge outdoor garden railway trains ("Large Scale") in 1/24th-scale. Some patterns have been completed, and many more are under construction. These kits and accessories will include complete Beyer-Garratt style of locomotives and Narrow Gauge ore hopper cars, as well as 24-inch & 30-inch gauge industrial equipment in this same scale.

SSS also has master patterns partially completed for many 1/16-scale model truck accessories and conversion kits, mainly for the Monogram-Revell 1/16-scale model truck kits.  Some projected accessories for these 1/16-scale kits are front drive axles, different wheels and tires, air cleaner accessories, pusher and tag axles, oil filters and engine accessories, and possibly different engines.  Cab & hood conversion kits remain a possibility for these monsters as well, but are still years away from being offered as there are more pressing projects to push forward with first.  But someday they should be available!

Thank you for your continued support!
 
Please direct all questions regarding this site to